Product Description

1. PRODUCT INTRODUCTION OF YGP ELECTRIC MOTOR

General notes YGP series motors powered by inverter for roller-table is based on YG series motors to extend the adjustable speed range, enlarge frame size and power range. It is designed to adopt the inverter to drive roller table in metallurgical industry. YGP motors features high overload capacity, high mechanical intensity, wide adjustable speed range, so the motors can be used not only in the roller table with continuous operation, but also in the roller table with frequent starting, braking, reversing operation.

The frame size of YG series motors is from H112 to H225. Its output torque is from 8 to 240 Nm and its frequency range is from 5 to 80Hz. But the frame size of YGP series motors is from H112 to H400, and its output torque is from

7 Nm to 2400Nm, and its frequency range is from 1 to 100Hz. YGP series motors can drive roller table with big torque and low speed

2. TECHNICAL FEATURES OF YGP ELECTRIC MOTOR

Rated voltage:380V, rated frequency:50Hz. supply the special voltage and frequency, such as 380V、15Hz,660V、20Hz, etc on the customers'request.

Frequency range:1 to 100Hz. Constant torque is from 1 to 50 Hz and constant power is from 50 to 100 Hz. Or change the frequency range on request.

Duty type:S1 to S9.S1 in the technical data table is only for reference.

Insulation class is H. The degree of protection for enclosure is IP 54, also can be made into IP55, IP56, IP65. The type of cooling is IC 410(surface nature cooling).

Position of terminal box: the terminal box is located on the left side of motors, which size is from H112 to H225 viewed from driving end, and is located on the top of the motors, which size is from H250 to H400 viewed from non shaft end.